wiki:FeddUsersGuide

Version 19 (modified by faber, 10 years ago) (diff)

--

Federation Users Guide

This tutorial walks through using the federation command line tools to create and operate federated experiments. To simplify the tutorial, most of the experiments are actually federated within DETERLab or between DETERLab and a desktop federant. The procedures generalize to more wide open federation.

In order to create federated experiments you will need permission to open holes in DETER's containment. Being able to connect across experiments or from an experiment to outside hosts means that users can send traffic that seems to originate from inside DETERLab - in fact some examples explain how to do that fairly generally. To get this privilege contact testbed operations.

Creating A Federated Experiment

We start by creating an experiment with the layout shown here:

Experiment Layout

Each square is a computer and each line a link. The layout is a simple dumbbell with nodes a and c as the ends of the inner "bar" and b, d, e, and f as the leaves. Nodes a, b, and d are in one testbed and c, e, f and f in another.

The following ns2 file is a description for such a topology:

# Simple federated topology, all on DETER
#
# SERVICE: project_export:deter/exp1::project=TIED
# SERVICE: project_export:deter/exp2::project=TIED
#

set ns [new Simulator]
source tb_compat.tcl

set a [$ns node]
set b [$ns node]
set c [$ns node]
set d [$ns node]
set e [$ns node]
set f [$ns node]
tb-set-node-testbed $a "deter/exp1"
tb-set-node-testbed $b "deter/exp1"
tb-set-node-testbed $c "deter/exp2"
tb-set-node-testbed $d "deter/exp1"
tb-set-node-testbed $e "deter/exp2"
tb-set-node-testbed $f "deter/exp2"


set link0 [ $ns duplex-link $a $b 1Gb 0ms DropTail]
set link1 [ $ns duplex-link $a $c 1Gb 0ms DropTail]
set link2 [ $ns duplex-link $a $d 1Gb 0ms DropTail]
set link3 [ $ns duplex-link $e $c 1Gb 0ms DropTail]
set link4 [ $ns duplex-link $f $c 1Gb 0ms DropTail]

$ns rtproto Static
$ns run

A copy of that file is attached to this page.

Most of that file looks like any other simple DETERLab experiment layout, and one can swap it in on DETERLab directly and get a single experiment. The differences are

  • The assignments of nodes to testbeds using tb-set-node-testbed
  • The assignments of projects within a testbed by the SERVICE directives in the comments

The this layout connects 2 experiment on DETERLab. This is because the testbeds are all prefixed with the deter testbed name. The testbed/sub-testbed syntax allows multiple instantiations of experiments on the same testbed. This layout creates 2 experiment on DETERLab (DETERLab's experiment contoller? maps the deter testbed name to DETERLab).

The commented lines including the SERVICE keyword configure experiment services?. The format of the line is 4 colon-separated parameters giving:

  • The service name (project_export other valid services are listed on the experiment services description?)
  • The exporter
  • The importers (comma-separated)
  • Any attributes (comma-separated name value pairs, each joined by an equals sign)

These lines request that each sub experiment be instantiated in the TIED project on DETER. People following this example should either remove the lines or edit them to name a project that they are a member of.

To create the federated experiment, execute the fedd_create.py command on users.isi.deterlab.net:

users:~$ fedd_create.py --file federation1.tcl --experiment_name fed1

The parameters are the file containing the layout (federation1.tcl) and the shorthand name the caller wants to use to refer to the federated experiment. The shorthand is a request. The experiment controller defines the namespace of experiments and will resolve conflicts. That is, if another user has already named an experiment fed1 on this controller, the controller with pick an new name.

Services can also by configured using the --service parameter to fedd_create.py. The format of the parameter is the same colon-separated list above.

This will run for a little while, as much as a few minutes. It is gathering rights to access remote testbeds and starting the sub-experiments on them. Shortly you will see something like:

localname: fed1
fedid: 6a4f58292d572c57ef612e3e44e5d8134196e550
status: starting

The localname is the name that the controller picked for the federated experiment, usually the same as the experiment_name parameter. If the output is different, the user will need to use that shorthand in subsequent commands.

The fedid is a unique identifier that refers to this experiment. We discuss ways to use this below.

Assuming that status is starting the experiment is being created. If there has been a error, there will be an error message as well.

At any time a user can poll the current status of their federated experiment using the fedd_multistatus.py command. Run it like this on users.isi.deterlab.net and you should see similar output:

users:~$ fedd_multistatus.py
fed1:6a4f58292d572c57ef612e3e44e5d8134196e550:starting

The output is the experiment name, the experiment fedid, and the status, comma separated. If an experiment creation has failed the output will look more like:

users:~$ fedd_multistatus.py
fed1:6a4f58292d572c57ef612e3e44e5d8134196e550:starting
bad_experiment:da83eb06712a2006abeae34308c363b0ab0faa0a:failed

The experiment called bad_experiment has failed to get created. When fed1 has finished swapping in (both parts) in DETERLab, the output will look like:

users:~$ fedd_multistatus.py
fed1:6a4f58292d572c57ef612e3e44e5d8134196e550:active
bad_experiment:da83eb06712a2006abeae34308c363b0ab0faa0a:failed

A user can certainly use the fedd_multistatus.py command to poll and monitor experiment creation, but output is fairly terse and polling is inefficient. The fedd_spewlog.py command will output a debugging log from the experiment controller. If the experiment is being created or terminated, the command puts out the log so far and continues updating it until the operation succeeds or fails. A user can follow the progress of the creation in real time using this command.

Here is sample output from the sample creation above:

users:~$ fedd_spewlog.py --experiment_name fed1
07 May 14 11:15:34 fedd.experiment_control.fed1 Calling StartSegment at https://users.isi.deterlab.net:23231 
07 May 14 11:15:34 fedd.experiment_control.fed1 Calling StartSegment at https://users.isi.deterlab.net:23231 
07 May 14 11:15:34 fedd.experiment_control.fed1 Calling StartSegment at https://users.isi.deterlab.net:23233 
Allocated vlan: 380807 May 14 11:16:34 fedd.experiment_control.fed1 Waiting for sub threads (it has been 1 mins)
07 May 14 11:17:34 fedd.experiment_control.fed1 Waiting for sub threads (it has been 2 mins)
07 May 14 11:15:37 fedd.access.fed1-exp1 State is swapped
07 May 14 11:15:37 fedd.access.fed1-exp1 [swap_exp]: Terminating fed1-exp1
07 May 14 11:15:41 fedd.access.fed1-exp1 [swap_exp]: Terminate succeeded
07 May 14 11:15:41 fedd.access.fed1-exp1 [make_null_experiment]: Creating experiment
07 May 14 11:16:02 fedd.access.fed1-exp1 [make_null_experiment]: Create succeeded
07 May 14 11:16:02 fedd.access.fed1-exp1 [start_segment]: creating script file
07 May 14 11:16:02 fedd.access.fed1-exp1 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/tmp739CnG faber@users.isi.deterlab.net:tmp739CnG
07 May 14 11:16:02 fedd.access.fed1-exp1 [ssh_cmd]: /usr/bin/ssh -n -o 'IdentitiesOnly yes' -o 'StrictHostKeyChecking no' -o 'ForwardX11 no' -i /usr/local/etc/fedd/deter/fedd_rsa faber@users.isi.deterlab.net sh -x tmp739CnG
07 May 14 11:16:03 fedd.access.fed1-exp1 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-P0TiQP/fedgw_rsa.pub faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp1/tmp/fedgw_rsa.pub
07 May 14 11:16:03 fedd.access.fed1-exp1 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-P0TiQP/fedgw_rsa faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp1/tmp/fedgw_rsa
07 May 14 11:16:03 fedd.access.fed1-exp1 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-P0TiQP/hosts faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp1/tmp/hosts
07 May 14 11:16:04 fedd.access.fed1-exp1 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-P0TiQP/ca.pem faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp1/tmp/ca.pem
07 May 14 11:16:04 fedd.access.fed1-exp1 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-P0TiQP/node.pem faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp1/tmp/node.pem
07 May 14 11:16:04 fedd.access.fed1-exp1 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-P0TiQP/client.conf faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp1/tmp/client.conf
07 May 14 11:16:05 fedd.access.fed1-exp1 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-P0TiQP/experiment.tcl faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp1/tmp/experiment.tcl
07 May 14 11:16:05 fedd.access.fed1-exp1 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-P0TiQP/software/fedkit.tgz faber@users.isi.deterlab.net:/proj/TIED/software//fed1-exp1/fedkit.tgz
07 May 14 11:16:06 fedd.access.fed1-exp1 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-P0TiQP/software/seer-fbsd71-current.tgz faber@users.isi.deterlab.net:/proj/TIED/software//fed1-exp1/seer-fbsd71-current.tgz
07 May 14 11:16:06 fedd.access.fed1-exp1 [modify_exp]: Modifying fed1-exp1
07 May 14 11:16:23 fedd.access.fed1-exp1 [modify_exp]: Modify succeeded
07 May 14 11:16:23 fedd.access.fed1-exp1 [swap_exp]: Swapping fed1-exp1 in
07 May 14 11:17:49 fedd.access.fed1-exp1 [swap_exp]: Swap succeeded
07 May 14 11:17:49 fedd.access.fed1-exp1 [get_mapping] Generating mapping
07 May 14 11:17:49 fedd.access.fed1-exp1 Node mapping complete
07 May 14 11:17:49 fedd.access.fed1-exp1 Link mapping complete07 May 14 11:15:37 fedd.access.fed1-exp2 State is swapped
07 May 14 11:15:37 fedd.access.fed1-exp2 [swap_exp]: Terminating fed1-exp2
07 May 14 11:15:41 fedd.access.fed1-exp2 [swap_exp]: Terminate succeeded
07 May 14 11:15:41 fedd.access.fed1-exp2 [make_null_experiment]: Creating experiment
07 May 14 11:16:02 fedd.access.fed1-exp2 [make_null_experiment]: Create succeeded
07 May 14 11:16:02 fedd.access.fed1-exp2 [start_segment]: creating script file
07 May 14 11:16:02 fedd.access.fed1-exp2 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/tmp6dcyg4 faber@users.isi.deterlab.net:tmp6dcyg4
07 May 14 11:16:02 fedd.access.fed1-exp2 [ssh_cmd]: /usr/bin/ssh -n -o 'IdentitiesOnly yes' -o 'StrictHostKeyChecking no' -o 'ForwardX11 no' -i /usr/local/etc/fedd/deter/fedd_rsa faber@users.isi.deterlab.net sh -x tmp6dcyg4
07 May 14 11:16:03 fedd.access.fed1-exp2 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-iH3Eaj/fedgw_rsa.pub faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp2/tmp/fedgw_rsa.pub
07 May 14 11:16:03 fedd.access.fed1-exp2 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-iH3Eaj/fedgw_rsa faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp2/tmp/fedgw_rsa
07 May 14 11:16:03 fedd.access.fed1-exp2 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-iH3Eaj/hosts faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp2/tmp/hosts
07 May 14 11:16:04 fedd.access.fed1-exp2 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-iH3Eaj/ca.pem faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp2/tmp/ca.pem
07 May 14 11:16:04 fedd.access.fed1-exp2 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-iH3Eaj/node.pem faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp2/tmp/node.pem
07 May 14 11:16:04 fedd.access.fed1-exp2 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-iH3Eaj/client.conf faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp2/tmp/client.conf
07 May 14 11:16:05 fedd.access.fed1-exp2 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-iH3Eaj/experiment.tcl faber@users.isi.deterlab.net:/proj/TIED/exp/fed1-exp2/tmp/experiment.tcl
07 May 14 11:16:05 fedd.access.fed1-exp2 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-iH3Eaj/software/fedkit.tgz faber@users.isi.deterlab.net:/proj/TIED/software//fed1-exp2/fedkit.tgz
07 May 14 11:16:06 fedd.access.fed1-exp2 [scp_file]: /usr/bin/scp -o IdentitiesOnly yes -o StrictHostKeyChecking no -o ForwardX11 no -i /usr/local/etc/fedd/deter/fedd_rsa /tmp/access-iH3Eaj/software/seer-fbsd71-current.tgz faber@users.isi.deterlab.net:/proj/TIED/software//fed1-exp2/seer-fbsd71-current.tgz
07 May 14 11:16:06 fedd.access.fed1-exp2 [modify_exp]: Modifying fed1-exp2
07 May 14 11:16:23 fedd.access.fed1-exp2 [modify_exp]: Modify succeeded
07 May 14 11:16:23 fedd.access.fed1-exp2 [swap_exp]: Swapping fed1-exp2 in
07 May 14 11:18:09 fedd.access.fed1-exp2 [swap_exp]: Swap succeeded
07 May 14 11:18:09 fedd.access.fed1-exp2 [get_mapping] Generating mapping
07 May 14 11:18:10 fedd.access.fed1-exp2 Node mapping complete
07 May 14 11:18:10 fedd.access.fed1-exp2 Link mapping complete07 May 14 11:18:11 fedd.experiment_control.fed1 [start_segment]: Experiment fed1 active
active

Much of that is useful only for debugging but the last line indicates the final status of the experiment creation. The two choices are active and failed.

Examining the Federated Experiment

To gather detailed information about how the system has created the experiment, use the fedd_ftopo.py command (ftopo is short for "federated topology"). Here's a sample invocation; again the --experiment_name parameter is the shorthand name returned by fedd_create.py or picked from fedd_multistatus.py.

users:~$ fedd_ftopo.py --experiment_name fed1
d:bpc144.isi.deterlab.net,d.fed1-exp1.TIED.isi.deterlab.net:active::deter/exp1
e:bpc130.isi.deterlab.net,e.fed1-exp2.TIED.isi.deterlab.net:active::deter/exp2
a:bpc151.isi.deterlab.net,a.fed1-exp1.TIED.isi.deterlab.net:active::deter/exp1
f:bpc142.isi.deterlab.net,f.fed1-exp2.TIED.isi.deterlab.net:active::deter/exp2
b:bpc154.isi.deterlab.net,b.fed1-exp1.TIED.isi.deterlab.net:active::deter/exp1
c:bpc150.isi.deterlab.net,c.fed1-exp2.TIED.isi.deterlab.net:active::deter/exp2

The output is colon-separated. The first fields are:

  • The node name from the experiment layout file
  • The local names that the individual testbed has given to the node. These are testbed dependent. If there is more than one name assigned by the testbed, they will be comma-separated.
  • The status of the individual node
  • Operations allowed on the node
  • The testbed name on which the node is instantiated

The first line describes node d. It can be accessed at bpc144.isi.deterlab.net and d.fed1-exp1.TIED.isi.deterlab.net. The node is active, defines no operations, is instantiated on deter/exp1.

Simple views of the topology can be produced by the fedd_image.py command. This invocation:

users:~$ fedd_image.py --experiment_name fed1 --out fed1.png 

Produces this image in fed1.png.

layout image

Computers are green squares, links are lines, and shared networks are blue circles (not shown). Each node is labeled with its name, each link or network with its name, and interfaces with their IP address. The labels can be removed with the --no_labels parameter:

unalbeled layout

The nodes can be grouped by any attribute, the most useful of which is the testbed on which they are instantiated:

fedd_image.py --experiment_name fed1 --group testbed --out fed1-group.png

produces

grouped layout

This is very similar to the image at the top of the page. That image was also produced using fedd_image.py but using the layout description directly:

users:~$ fedd_image.py --file federation1.tcl  --group testbed --out fed1-groups.png

because the specification does not include the IP addresses, they are not in the image.

Looking Around Inside The Federated Experiment

Armed with the information from fedd_ftopo.py a user can log in to an experiment node and see the unified experiment. The user can log into a node d by:

users:~$ ssh d.fed1-exp1.TIED

From there the user can ping the various nodes in both parts of the federated experiment and run any tools, etc. as though it were a single DETER experiment.

The experiment is composed of two DETER experiments. The federation system does hide this, but it is not hard to deduce the experiment names from the fedd-ftopo.py output. In this case the two experiments are:

Experiment 1 and Experiment 2

Because each testbed only knows about the resources it has committed to the federated experiment, these representations are incomplete. Even the two virtual testbeds on DETERLab do not include information about the other testbed.

It can be instructive to see how the federation system interconnects these experiments.

Logging into node d in the deter/exp2 sub-experiment, inspecting the routing table shows:

d:~$ ip route
default via 192.168.1.254 dev eth1 
10.0.0.0/24 dev eth2  proto kernel  scope link  src 10.0.0.1 
10.0.1.0/24 via 10.0.0.2 dev eth2  proto zebra  metric 30 
10.0.2.0/24 via 10.0.0.2 dev eth2  proto zebra  metric 30 
10.0.3.0/24 via 10.0.0.2 dev eth2  proto zebra  metric 20 
10.0.4.0/24 via 10.0.0.2 dev eth2  proto zebra  metric 20 
192.168.0.0/22 dev eth1  proto kernel  scope link  src 192.168.3.144 
192.168.252.0/22 via 192.168.1.254 dev eth1  proto zebra 

There are routes in the table to hosts that are not in the DETERLab experiment. Specifically none of 10.0.0.0/24, 10.0.3.0/24 or 10.0.4.0/24 are present in the TIED/fed1-exp2 experiment that contains d. (The 192.168. addresses are all for accessing DETERLab infrastrcuture.)

The federation system has done 4 things to make it possible and simple for the sub-experiments to communicate.

  • The experiment controller? assigned consistent network (IP) addresses to the experiment nodes.
  • The controller configured and started ospf routers on each machine to propagate routes between the two experiments.
  • The controller interconnected the two experiments through a local VLAN (by coordinating with a third virtual testbed)
  • Entries for the nodes in the other experiment were added to /etc/hosts so symbolic names can be used to reach nodes allocated in either experiment.

Similar work can be done to present unified login information and shared filesystems. That is not done in this case because the experiments are both in the same DETER project and testbed.

Releasing Resources

When the federated experiment is no longer needed, the fedd_terminate.py command is used to release resources. Individual testbeds release resources and the experiment controller purges all its data. To release the experiment above:

users:~$ fedd_terminate.py --experiment_name fed1

The command does not return until the individual testbeds have released their resources.

The --force parameter can be used to terminate experiments that are not in the active state, or that have other problems.

Generating and Using TopDL Descriptions

TopDL is the XML-encoded layout description language that the federation system uses internally. While ns2/tcl can be shorter and easier to generate - especially by human programmers - it can be very difficult for tools to deal with. In particular, because each ns2 description is a program in a Turing-complete interpreted language, extracting the layout for analysts or presentation requires running the program. Translation of XML is much less computationally expensive and presents fewer security concerns.

The fedd_create.py command will take either a topdl or an ns2 description. To get topdl description from an ns2 description, one can use the fedd_ns2topdl.py command. Note that this command must contact an experiment controller? to do the conversion. DETERLab's experiment controller at https://users.isi.deterlab.net:23235 provides this service. Running fedd_ns2topdl.py on that machine contacts the experiment controller by default.

Converting the experiment layout we used above into topdl is done by running this command on users.isi.deterlab.net:

fedd_ns2topdl.py --file federation1.tcl --out federation1.xml

The contents of federation1.xml, run through an XML formatter, are attached. The topDL representation is much more verbose, but encodes the same information about layout.

The information it does not encode is the service? information. When using the topdl representation, services have to be passed to fedd_create.py using the --service parameter, like so:

users:~$ fedd_create.py --service project_export:deter/exp1::project=TIED --service project_export:deter/exp2::project=TIED --file federation1.xml --experiment_name fed2
localname: fed2
fedid: 4758ff5a8b20ec1a54ea59f84e1eaaf60ee39cf9
status: starting

The two formats are generally interchangeable using federation tools, though some external tools will prefer one or the other.

Federating A Desktop Computer Into A DETER Experiment

The DETER lightweight federation system is a simple way to join your desktop with a DETER experiment. The desktop can dynamically join an experiment in DETER when the DETER experiment is created using the federation system. The technology in general is also called DETER desktop federation.

The desktop runs virtual machine image that DETER provides and needs some simple configuration from the experimenter to coordinate with DETER. In the simplest case, that configuration consists of:

  • The IP address on which DETER can reach the VM
  • The DETER(s) user who is allowed in create experiments that talk to this ExoGENI slice

The rest of this document describes how to get and use the lightweight federation technology.

Getting The Lightweight Federation Image and Getting DETER Federation Rights

The lightweight federation image can currently be found at http://vim.isi.edu/fedd.ova . This is an open virtualization format file that can be imported by many virtual machine monitors (VMMs). In particular, virtualbox, a free, open source VMM that runs on many operating systems will import the file.

In addition, users will need to get ther DETER accounts authorized to create federated experiments. DETER administration controls this facility because it allows users to reach outside DETER, which we normally do not allow. To get an account authorized for federation, contact faber@….

Connecting a Desktop Node to a DETER Experiment

This section is a tutorial description of setting up a federated experiment to using the VM above.

Configuring The Desktop

Download the VM image above and import it into a VMM. If using virtualbox, the directions are here. In addition, you will need to forward external connections on port 23231 into the virtual machine. Instructions for this are here.

Start the VM and log into it. The account on the VM is fedd and the password is fedd. Do not allow remote logins to this VM unless you change the account's password.

The image provides a script to set up a single node for federation. The script and the federation configuration both are stored in the /usr/local/etc/fedd directory. To configure the federation system, log into the node, change directory to /usr/local/etc/fedd and run the init_fedd script there. It takes 2 parameters, the management IP address and the experimenter to authorize. The following sequence will configure fedd to allow user "faber" to contact DETER using IP address 192.1.242.14:

~# cd /usr/local/etc/fedd
/usr/local/etc/fedd# ./init_fedd 192.1.242.14 faber

When that script completes, start the federation system on the VM. When debugging we recommend leaving a window open and running the daemon as:

# fedd.py --config /usr/local/etc/fedd/desktop.conf --debug

You can also run it in the background, logging to /var/log/fedd.log by:

# touch /var/log/fedd.log
# fedd.py --config /usr/local/etc/fedd/desktop.conf --logfile /var/log/fedd.log &

fedd.py expects the logfile to exist, hence the touch command.

There are some detailed debugging messages that libraries and other dependent software produce that are visible with --debug that are lost during normal logging.

Creating the experiment on DETER

To connect the desktop to a DETER experiment, specify an federated experiment with the desktop as being on testbed "desktop". Here is an example DETER experiment description of that format:

# simple DETER topology federated to a desktop
#

set ns [new Simulator]
source tb_compat.tcl

set a [$ns node]
set b [$ns node]
set c [$ns node]
set d [$ns node]
set e [$ns node]
set f [$ns node]
tb-set-node-testbed $a "deter"
tb-set-node-testbed $c "deter"
tb-set-node-testbed $d "deter"
tb-set-node-testbed $e "deter"
tb-set-node-testbed $f "deter"

tb-set-node-testbed $b "desktop"

set link0 [ $ns duplex-link $a $b 1Gb 0ms DropTail]
set link1 [ $ns duplex-link $a $c 1Gb 0ms DropTail]
set link2 [ $ns duplex-link $a $d 1Gb 0ms DropTail]
set link3 [ $ns duplex-link $e $c 1Gb 0ms DropTail]
set link4 [ $ns duplex-link $f $c 1Gb 0ms DropTail]

$ns rtproto Static
$ns run

You can download a copy of that file.

That file specified a topology that looks like this. Computers are boxes and network connections are lines. The larger blue outlines show which testbed each computer is in.

Desktop federation example visualization

To instantiate that topology, run the command:

fedd_create.py --file desk.tcl --experiment_name $EXPNAME --map desktop:https://$MGMT_IP:23231

where $EXPNAME is replaced with a short mnemonic name for the combined experiment and $MGMT_IP is the IP address of the node running the federation software. You can use its DNS name as well.

When that returns, it will return something like:

localname: faber-smart5
fedid: 2b7b6852a2db53d3e77431937e1da01d8fbf335d
status: starting

DETER is coordinating between its local federation controllers and the one running on the desktop node, allocating resources, and stitching them. You can check the status same commands we used above.

Interacting with the Experiment

Once an experiment is active, it completes stitching itself together and a user can log in to the various nodes using the native testbed mechanisms. That stitching may take a minute or two after the federation system declares the experiment active. Additionally it may take the dynamic routing some time to converge, depending on the complexity of the topology.

Inside the DETER experiment, one can log into the nodes and interact with them by node name as usual. Details are here. With node b on the desktop and a on DETER, as shown above, this sequence shows the transparent connection. A user logs into node a in the local experiment (experiment faber-smart5 in in project detertest) and pings node b from node a.

users.isi.deterlab.net:~$ ssh a.faber-test.detertest
a:~$ ping b
PING b-link0 (10.0.3.2) 56(84) bytes of data.
64 bytes from b-link0 (10.0.3.2): icmp_req=1 ttl=64 time=152 ms
64 bytes from b-link0 (10.0.3.2): icmp_req=2 ttl=64 time=76.3 ms

While for all intents and purposes, b (the desktop) is part of the experiment, the long ping times make it easy to identify:

a:~$ ping e
PING e-link3 (10.0.1.1) 56(84) bytes of data.
64 bytes from e-link3 (10.0.1.1): icmp_req=1 ttl=63 time=0.797 ms
64 bytes from e-link3 (10.0.1.1): icmp_req=2 ttl=63 time=0.437 ms

Similarly, one can log into the desktop VM node and see the DETER nodes by the same names:

root@server-18393:~# ping a
PING a-link2 (10.0.0.2) 56(84) bytes of data.
64 bytes from a-link2 (10.0.0.2): icmp_req=1 ttl=64 time=76.7 ms
64 bytes from a-link2 (10.0.0.2): icmp_req=2 ttl=64 time=76.5 ms

It may be surprising, but the desktop node can route to nodes throughout our multi-hop DETER topology:

root@server-18393:~# ping c
PING c-link3 (10.0.1.2) 56(84) bytes of data.
64 bytes from c-link3 (10.0.1.2): icmp_req=1 ttl=63 time=153 ms
64 bytes from c-link3 (10.0.1.2): icmp_req=2 ttl=63 time=76.7 ms

The federated experiment in DETER runs ospf on each node, and fedd.py starts an ospf daemon on the desktop VM node as well. The desktop simply discovers the routing table from that connection. We will show how to expolit this connection to interconnect more interesting topologoes.

Tearing The Experiment Down

To tear down the experiment, use the same fedd_terminate.py command as before.

users:~$ fedd_terminate.py --experiment_name $EXPNAME

This releases the DETER resources and disconnects the desktop node.

If an experimenter tears down the desktop VM before the fedd_terminate.py command is issued, or there is some other problem, the --force flag can be given to make fedd_terminate.py purge all state that the federation system can reach.

A More Complex Desktop Topology

To connect a more complex ExoGENI topology, we look at routing from a two-node ExoGENI world into the same DETER topology. The ExoGENI topology looks like this:

No image "ExoGENI.png" attached to FeddUsersGuide

Node0 is running the fedd and will be accessible as before at hostname "b". In addition we will make Node1 accessible throughout the DETER topology by its IP address.

When we create the ExoGENI topology we use the AutoIP feature of Flukes to assign addresses. By default Flukes puts the addresses on the 172.16.0.0/30 subnet. We move those addresses to the 10.16.0.0/24 subnet by editing the nodes' properties. DETER uses the 10.0.0.0/8 network block for experiment interfaces. It uses the 172.16.0.0/30 net for addressing containers management interfaces.

When the slice is ready, log in to Node0 and run the init_fedd utility as before. In addition, add the following lines to /usr/local/etc/fedd/desktop.config:

# Export Interfaces (interfaces to run OSPF on/export to DETER).
# Comma-separated list of interface names
export_interfaces: eth1

# Export Networks (networks to export to OSPF - these usually correspond 
# to export_interfaces).  Comma separated
export_networks: 10.16.0.0/24

With those settings, fedd.py will export any routes discovered on eth1 and network 10.16.0.0/24 to the ospfd running in DETER.

The simplest way to export a complex ExoGENI topology is to just run ospfd inside the ExoGENI topology. With these settings, the combined experiment will be able to route throughout the experiment as soon as routing converges. For this simple topology to work, we log in to Noed1 in exoGENI and add a route to all the DETER nodes through Node0:

# ip route add 10.0.0.0/16 via 10.16.0.1

Start up fedd.py on Node0 as before and run the same fedd_create.py command on DETER.

In addition to being able to contact Node0 directly, nodes in the DETER experiment now see a route to the 10.16.0.0/24 network:

a:~$ ip route
default via 192.168.1.254 dev eth4 
10.0.0.0/24 dev eth2  proto kernel  scope link  src 10.0.0.2 
10.0.1.0/24 via 10.0.4.2 dev eth1  proto zebra  metric 20 
10.0.2.0/24 via 10.0.4.2 dev eth1  proto zebra  metric 20 
10.0.3.0/24 dev eth0  proto kernel  scope link  src 10.0.3.1 
10.0.4.0/24 dev eth1  proto kernel  scope link  src 10.0.4.1 
10.16.0.0/24 via 10.0.3.2 dev eth0  proto zebra  metric 20 
192.168.0.0/22 dev eth4  proto kernel  scope link  src 192.168.1.188 
192.168.252.0/22 via 192.168.1.254 dev eth4  proto zebra 

That route reaches Node1:

a:~$ ping 10.16.0.2
PING 10.16.0.2 (10.16.0.2) 56(84) bytes of data.
64 bytes from 10.16.0.2: icmp_req=1 ttl=63 time=139 ms
64 bytes from 10.16.0.2: icmp_req=2 ttl=63 time=69.9 ms
64 bytes from 10.16.0.2: icmp_req=3 ttl=63 time=69.4 ms

While some attention needs to be paid to routing if routing protocols are not run in ExoGENI, this facility allows a wide range of connectivity between the testbeds.

Attachments (11)

Download all attachments as: .zip